Merrick
e328fd6263
Added Fusion files
...
These files are the design for the "product" that is the T-Shirt Press
2020-02-03 12:58:15 -05:00
Merrick
37e33703ec
Updated schematic
2020-01-16 18:03:20 -05:00
Merrick
9a80fcdd83
Added parts to schematic
...
Added STM32F429ZIT6 which I used for development and will be using for the bard that is created in this pcb. I most likely will be using the pcb assembly services of something like JLCPCB because I probably will be using parts that are too small to be hand soldered
2020-01-16 11:54:06 -05:00
Merrick
dd98b5e026
Added eagle files
2020-01-15 16:43:47 -05:00
Merrick
11e1cbd5c3
Actively working, needs a PID tune
2020-01-09 17:05:46 -05:00
Merrick
722622862c
Small changes
2019-11-21 14:54:40 -05:00
Merrick
095897e35a
PID Implemented
...
PID is now implemented and works as intended, the solid state relay needed a much slower carrier frequency for the PWM signal so the prescaller was set to 7. PID tuning is what needs to happen next.
2019-11-12 18:15:55 -05:00
Merrick
a4656b05a5
Updated to include basic PID calculation
...
Will need to further change to remove integral wind up and add a low pass filter to filter the noise for the derivative term.
2019-11-12 08:50:31 -05:00
Merrick
58c696f094
CubeMX broke things on my other computer
2019-11-08 14:59:38 -05:00
maxunm
69e7641b34
Files just changed from opening the project
...
May have to look into having a git ignore more properly set up in the future
2019-11-08 12:13:23 -05:00
Merrick
a9933f5ed7
Final commit tonight
2019-11-08 01:04:44 -05:00
Merrick
da8f17cc2d
Wrote temp conversion code
...
The temperature conversion code should take in the ADC value received by the microcontroller and convert it to all three usable temps.
2019-11-08 01:01:13 -05:00
Maxunm
517516745d
Update README.md
2019-11-08 00:35:38 -05:00
Merrick
ad7efe8b9b
Initializing repository
...
This is the progress that I had made before putting this project on GitHub
2019-11-08 00:28:18 -05:00
Maxunm
a99bef95a3
Initial commit
2019-11-08 00:25:51 -05:00
