c661ddc2eb
Some checks failed
My Build All / build_windows (push) Has been cancelled
My Build All / build_linux_portable (push) Has been cancelled
My Build All / build_linux_appimage (push) Has been cancelled
My Build All / build_macos (push) Has been cancelled
My Build All / Publish release assets (push) Has been cancelled
Shellcheck / Shellcheck (push) Has been cancelled
173 lines
No EOL
3.3 KiB
JSON
173 lines
No EOL
3.3 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "0.12mm High Quality @BBL X1C",
|
|
"inherits": "fdm_process_single_0.12",
|
|
"from": "system",
|
|
"setting_id": "GP103",
|
|
"instantiation": "true",
|
|
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
|
"bridge_speed": [
|
|
"50",
|
|
"50"
|
|
],
|
|
"default_acceleration": [
|
|
"4000",
|
|
"4000"
|
|
],
|
|
"enable_overhang_speed": [
|
|
"1",
|
|
"1"
|
|
],
|
|
"enable_height_slowdown": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"gap_infill_speed": [
|
|
"230",
|
|
"230"
|
|
],
|
|
"inner_wall_speed": [
|
|
"150",
|
|
"150"
|
|
],
|
|
"internal_solid_infill_speed": [
|
|
"180",
|
|
"180"
|
|
],
|
|
"initial_layer_infill_speed": [
|
|
"105",
|
|
"105"
|
|
],
|
|
"initial_layer_speed": [
|
|
"50",
|
|
"50"
|
|
],
|
|
"initial_layer_acceleration": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"inner_wall_acceleration": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"initial_layer_travel_acceleration": [
|
|
"6000",
|
|
"6000"
|
|
],
|
|
"outer_wall_acceleration": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"outer_wall_speed": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"overhang_1_4_speed": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"overhang_2_4_speed": [
|
|
"30",
|
|
"30"
|
|
],
|
|
"overhang_3_4_speed": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"overhang_4_4_speed": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"overhang_totally_speed": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"print_extruder_id": [
|
|
"1",
|
|
"1"
|
|
],
|
|
"print_extruder_variant": [
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow"
|
|
],
|
|
"sparse_infill_pattern": "gyroid",
|
|
"sparse_infill_speed": [
|
|
"180",
|
|
"180"
|
|
],
|
|
"smooth_coefficient": "150",
|
|
"slowdown_start_height": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"slowdown_start_speed": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"slowdown_start_acc": [
|
|
"100000",
|
|
"100000"
|
|
],
|
|
"slowdown_end_height": [
|
|
"400",
|
|
"400"
|
|
],
|
|
"slowdown_end_speed": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"slowdown_end_acc": [
|
|
"100000",
|
|
"100000"
|
|
],
|
|
"small_perimeter_speed": [
|
|
"50%",
|
|
"50%"
|
|
],
|
|
"small_perimeter_threshold": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"sparse_infill_acceleration": [
|
|
"100%",
|
|
"100%"
|
|
],
|
|
"support_speed": [
|
|
"150",
|
|
"150"
|
|
],
|
|
"support_interface_speed": [
|
|
"80",
|
|
"80"
|
|
],
|
|
"top_surface_speed": [
|
|
"150",
|
|
"150"
|
|
],
|
|
"top_surface_acceleration": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"travel_speed": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"travel_speed_z": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"travel_acceleration": [
|
|
"10000",
|
|
"10000"
|
|
],
|
|
"vertical_shell_speed": [
|
|
"80%",
|
|
"80%"
|
|
],
|
|
"compatible_printers": [
|
|
"Bambu Lab X1 Carbon 0.4 nozzle",
|
|
"Bambu Lab X1 0.4 nozzle",
|
|
"Bambu Lab P1S 0.4 nozzle",
|
|
"Bambu Lab X1E 0.4 nozzle"
|
|
]
|
|
} |